HP DesignJet 500ps InkJet Printer "check printhead path 1" Questions

...check  printhead path Type 1 Please read through some of the information provided in this link and this link from the HP support forums. Also see this basic troubleshooting guide here. I hope ...

...check printhead path (1) but the carriage barely moves? The problem started with a shreded belt. That was replaced. Then the check printhead path error showed up. The rods have been oiled, the ...

...Check printhead path (Type 1)" error. On startup, the printhead is starting to move very slowly as usual to find the sides of the print path. It moves to the far right, and then to the far left. At ...

Check Printhead Path Type (1)" Switch on & observe the carriage behavior for hitting right ot left frames. Clean encoder with dry cloth to avoid ink marks on it & also check for damages..

printhead path Type (1)' comes up The carriage for the printheads does not return fully to it right side of the plotter Open Rh Cover , Remove All the Ph Cleaners Pull The Tray in Which We Seat the Ph

when we start the printer meachine showing check printhead path 1 error can u help me how to clear the error thanks pls refix your printer catridge.

check printhead (1) Good morning. The CHECK PRINT HEAD PATH error is caused by the sensors on the print head carriage sending signals to the electronics that the carriage speed is incorrect. Generally

...path 4. switch power on 5. align printheads- Problem Description: Carriage-Axis shutdown. Corrective Action: If this error code appeared but was NOT caused by a paper jam, then try the following: 1) ...

check the black rubber belt that drives the printhead assembly. It should be taunt. If it is loose there is a problem. I have had several 1100 series designjets throw their belt off the tension pulley

Check Printhead cleaner Path I have an error message coming up says "switch power off, check printhead cleaner path", I have already changed the all 4 cleaner and printer heads, yet the message still ...