...86:01 System Error 86:01, Noise Along the Carriage Path carriage moves or system error 86:01 is being displayed on the printer's front panel. General causes are media or other obstructions in the ...
86:01 error in designjet 500 plus Paper jam... System Error: 86:01 Problem Description: Carriage-Axis shutdown. Corrective Action: If this error code appeared but was NOT caused by a paper jam, then ...
Question about HP DesignJet Office Equipment & Supplies
...86:01 possible paperjam, after changing encoder strip and encoder sensor, carriage PCB. I still have 86:01 error, after Scan Axis in maintenance mode, the error is 02:10 cant read encoder strip. I ...
Question about HP DesignJet Office Equipment & Supplies
...86:01 System Error: 86:01 Problem Description: Carriage-Axis shutdown. If this error code appeared but was NOT caused by a paper jam, then try the following: * Too much friction in the Slider Rod. ...
Question about HP DesignJet Office Equipment & Supplies
...86:01" for my hp designjet 800. System Error: 86:01 Problem Description: Carriage-Axis shutdown. Corrective Action: If this error code appeared but was NOT caused by a paper jam, then try the ...
86-01 Error 86:01 still there. I replaced encoder strip twice, encoder sensor. Carriage PCB and Mech PCB. I'm out of options now. Maybe the scan ax motor, but during scan ax test the motor ...
Question about HP DesignJet Office Equipment & Supplies
86 :01. Pls. i need assistance 86.01 can be a couple of issues pertaining to the movement of the carriage assembly. 1. Too much friction in the Slider Rod. Lubricate the slider rod. 2. The Carriage is
...86:01 jura.wi.mit.edu/bio/graphics/retreatposters/500_800%202.pdf - something is wrong with the Carriage Usually the sensor see below. ...
Question about HP DesignJet Office Equipment & Supplies
...86:01 Possible paper jam I am receiving error message of : "86:01 Possible paper jam". I have removed the (non-jammed) paper, restarted with no luck. Previously received an error message of "reseat ...
...86:01 Its a HP Designjet Z6100 42inch and i have already changed: belt, scan axis motor, carriage pca, encoder strip, encoder sensor, trailing cable, mainboard, hard disk, interconnect pca, printmech ...
57 questions posted
Usually answered in minutes!
125 Questions
147 Questions
140 Questions
140 Questions
87 Questions