HP OfficeJet Pro 1170c InkJet Printer "turn alignment request" Questions

...Turn machine on.. The unplug power cable on the back.... Press & Hold # 3 while connecting power cord. keep it pressed & hold till screen display reset or shuts down... Then follow the prompts on ...

...Turn on the power. Lift the print carriage access door on the front of the unit, just above the output tray. The print carriage will move into the middle of the access area. Figure 1: Raising the ...

...turn on, press ON. Let the product initialize until a front panel message appears, requesting ink cartridges. If the carriage cannot move, remove the power cable again and determine what the carriage ...

...request you to perform the below steps. 3. Clean Print Heads from the Front Panel. =============================== 1. Press the Setup button on the control panel. 2. Press the number 6 on the keypad ...

turn back on while holding #,6 button. it make the same think on printing the alignment test. I have a similar failure on a HP6210 All-In-One Error: 0xC0620004411:lib.micci2.0 Issue cause: ===========

...turn the printer on it only asked you to press enter to re-align the cartridges and then keeps constantly repeats this request. I cannot clear down this problem and therefore cannot print anything. ...

...Turn on the printer, and you can see the alingning page. Put that page in the scanner and press the key SCAN. Although it has already done, some printers will lose the registration and request a new ...

turn on my printer, I get the re-alignment page It's very difficult not knowing what printer and what cartridge. As long as it is doing alignment, it means it is accepting your cartridge. But since it

...Alignment was FINALLY succesful. If I were to put anything on this troubleshooting, it was pulling BOTH cartridges back out and resetting them printer is the HP Photosmart C5550 , bought from Costco ...

...turn on the printer but do not connect the printer to the computer. - Insert the driver CD and do the install process. - At the time of the install process, it would appear the request connect the ...