...it. Now the printer won't turn on at all. I've checked all connections, tried a different power outlet and kettle cable. It looks terminal. I've had it for about two years, but it has had ...
Power Issue HP 9500n We have a 9500n printer that will not power up. we have swapped power cables and outlets, to kown good power cables and outlets, and it still will not power up. have pushed the ...
Hp 2840 Laser Jet wil not power on HP laser jet 2840 will not power on. I have checked- 1. Power cord - OK 2. Power source (240 volt.) (Australia) OK 3. There are no lights on the control panel. 4 ...
...as per below. Please try below resets one after the other if issue is not solved by 1st method. Power Drain: Turn OFF the printer, disconnect the power cable from backside of the printer and from ...
safety power fuse location HP 2600n Where is the power fuse located on the HP 2600. There was a power surge and need to locate fuse. power supply board. you can trace it near where you can see the ...
Question about HP LaserJet Office Equipment & Supplies
HP CM2320fxi HAS NO POWER. Plug it into wall socket, push power on button, nothing happens. I'm not positive about the 2320, but most HP laser printers use a rod that connects the power switch ...
Question about HP LaserJet Office Equipment & Supplies
Printer keeps turning its self off after power surge 5 days ago HP2727NFS perform a POWER DRAIN. Steps to perform a power drain. 1. Switch off the printer and remove the power chord from the wall jack
Question about HP LaserJet Office Equipment & Supplies
HP LaserJet 4 will not power up. For several months, it has been taking longer and longer to power up. Flip the switch and nothing happens for minutes, then it cycles on. Now, nothing. No lights, no ...
50.2 error message Internal hardware error. Try cycling the power. If it still occurs, power off and remove the power cord. Take the fuser out. Wait 20 minutes. Reinstall the fuser. Reattach the power
Question about HP LaserJet Office Equipment & Supplies
The lights do not come on my LJ 1012. I have power coming to it (I substituted a LJ 1020), The power switch is on, and the one fuse inside near where the power comes in is good. I you are tec guy: ...
229 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions