...remove all paper from the paper tray & disconnect it from the computer. With the printer off, check for any obstructions such as torn paper or foreign objects. Turn on the printer (still disconnected ...
Question about Konica Minolta Office Equipment & Supplies
...get it off. I remove the obvious screws but it still seems to be attached to something. What am I missing? Check the tray up/down motor,the tray upper limit and the stapler paper exit upper
Question about Office Equipment & Supplies
...paper) and remove the paper feeding tray/s. 2. have a clean sheet of paper ready to use. 3. Find the paper feeding rollers. usually at the back side (visible after removing thr covers in stage 1. 4. ...
...remove the paper tray.There is no paper jamed in the machine. Follow the Introduction: The flashing error code that indicates a jammed printer is the digital-age equivalent of a flat tire. Sooner or ...
Question about Office Equipment & Supplies
...down and restarting the printer. The paper just comes out at finisher stacker tray. Koday Hero 7.1 carriage jam. Stuck to the left side. No paper jam can be found but can't get the carriage to
Question about HP LaserJet Office Equipment & Supplies
...Remove the paper from the In tray, then push in the catches to release the in tray. Figure 1: In tray catches Open the In tray to a horizontal position.Gently pull the jammed paper to remove it from ...
Question about HP LaserJet Office Equipment & Supplies
...paper stuck behind the tray. If so remove it then do a trouble resset and see if it fixes your problems. Most of the time I have seen that error is been when they have filled the paper tray with to ...
...paper feed tray was pulled into the printer. The cover at the rear of the printer was knocked off. The printer stopped with a paper jam. I removed some of the paper with sheets left on top and bottom ...
Question about Office Equipment & Supplies
...Remove the paper from bottom exit of the finisher. DESCRIPTION: Code 74-4 from the E-mail alert system. SOLUTION ID: 154058 SOLUTION: CAUSE: Paper remains inside finisher. SOLUTION: Please remove ...
remove paper from finisher tray Error message showing "remove paper from finisher tray" although there is no paper there. If the paper is removed then check the sensor if you do not see it then have a
18 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
