...plotter displayed the error "Turn printer off and check print path." When checking the path I discovered a black rubber washer approx 3in in diameter wedged beneath the carriage underneath the black ...
...plotter, there is a known problem with the starwheel lift mechanism whic is solved by the firmware upgrade,. if you havent seen either of those errors then your problem may lie with torn paper in or ...
...PLOTTER CHECK PAPER PATH. THERE IS NO OBVIOUS BLOCKAGE TO PAPER PATH If there is no obvious obstruction in the print head path, the most likely problem is a worn carriage belt. Open the front lid and ...
...Check Print Head Path Error 2 is a worn out carriage belt. Open the top cover and locate the carriage belt. It is the long thin belt that extends the full length of the plotter. Use a light and look ...
...check print head path(2) Sounds like a belt tensioner bearing going bad. That is if you haven't found any paper lodged in the way, the carriage bar is lubricated well and the belt is in decent shape. ...
Question about HP DesignJet Office Equipment & Supplies
plotter to print. I rebooted and now have 2 error lights, 1 for data, and 1 for cartridges. What to do? Take out your paper (check if you are loading the roll from "underneath" and not from the front)
...check the Scan-Axis usage. If the percentage is close to 100%, then lubricate the Slider Rod. The Carriage is bumping into the Service Station. If the carriage is stuck at the right hand side of the ...
181 questions posted
Usually answered in minutes!
125 Questions
140 Questions
140 Questions
87 Questions
92 Questions