HP LaserJet 4200tn Printer "not connect" Questions

We replaced the print cartridge and now cannot get the top lid to close..... what are we doing wrong? when you put new cartridge make sure that the circuit connection is perfactly connected with the ...

...connect it if it asks you whether printer is connected to the network,select no click on next if usb is already plugged in,tick the box that says it's already plugged in hit next wait for the ...

...not work anymore. The printjob comes in an error state. If I disconnect/connect the USB cable, it start to works again. The USB connection is direct to the USB connector of the PC, not using the hub. ...

Not printing from network.All cables connected Not printing from network.all cables connected. Also when searching for printer it still shows up.i've tried turning it off and on i printed an ip Config

...connect it there. If the printer is connected to a PC, that port could be bad. If you have another printer, try plugging it into the PC. As long as you don't have the handshake between PC and ...

...through a surge connect directly to the wall. If the printer is still not responding it could be the low voltage power supply, and would require to be serviced. Al ...

...connect to the printer. 2. If not, check the cable connection connecting from your computer to the switch hub or router. Maybe it is just loosen for some reasons. Remove the cable to the router and ...

Not able to print Hi I have a 2600n color jet printer and now I am not able to print it shows a message that either your printer is not connected properly or used by VPN client when it will be free ...

...not in extension.3.connect extension telephone phone to the device & check for the dial tone. Dial the number and observe weather extension phone is ringing? A. *If extension phone is ringing ...

...not recognized on your computer, try to directly connect the printer to your computer without the USB hub. If you are connecting the printer to your computer via a USB hub, make sure the USB hub ...