HP LaserJet 2100 Printer "print job not" Questions

...and your printer. Are the pages that are printing gibberish or is it the correct print job? If gibberish, you might have a corrupted print driver or the file you are printing might be

...print job is sent from the computer the printer receives the job as is evident from the print job management screen; the printer responds and the rollers start up but then the red light comes on ...

print job goes to print queue but does not print I print the job, when I go to see whats printing the job hits the queue but does not print then after about 20 sec it drops off Un install the drivers.

...print job that you want to cancel, and then click Cancel. • To cancel all print jobs, click Cancel All Documents on the Printer menu. If you are using an HP printer and a windows vista operating ...

automatic duplexing) for media that is supported by the duplexing unit. For media that is not supported by the duplexing unit, the job will be treated as Print on Both Sides (Manually) (manual duplex)

...print job. Delete your pending print job then reboot the printer. OR unplug the network cable, reboot printer, it will say Ready. Do not plug in network cable otherwise you will get 49 error. Plug in ...

Print one job Forever My HP 2600n print one job nonstop, while it was given a command to print only one copy. I remove paper as the only solution to stop it because even cancel does not stop it. Once ...

...print the job requsted. A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands, corrupt data, ...

HP laserJet 5000 Printer continually printing same page I send a job to the printer, and it just prints the first page non-stop. I have to cancel the job to clear it. Then I send the job again and it ...

...print job sent to the printer I get a blank page (printing job can be more than one page). After the blank page, GO light is solid while lower orange light is blinking. Manual feed option is off ...