HP LaserJet 9500n Printer "fan error 57" Questions

...ERROR message. What does that mean? We have no manual. A fan failure was detected.Printer fan or Duplex fan. 1. Check the fan?s connector and make sure the fan is not blocked. 2. Replace the fan. On ...

...Fan Error". Is it fixable? 57 Fan Error Turn off then on The device has experienced a problem with its internal fan. Turn off the power by using the power switch, wait at least 30 seconds, and ...

...it with a working fan does not solve the error. By the way, even the new fan does not spin when the printer is switched on. Any ideas? ITS THE FAN UNDER THE TOP COVER THAT EXHAUSTS THE ...

...Fan error,it is on the right-hand side,and below. Reseat connections to the specified fan and DC controller. If the error persists, replace the specified fan. If the error persists Replace the DC ...

error code 57.3??? Fan number 3 (I don't have the manual on me or I would tell you exactly which fan that is) is either dirty or fried. OR it's the DC controller. A temporary printer error has occured

...fan error turn off then on fan error: the device has experienced aproblem with its internal fan You will need to replace the fan.  Looking at the front of the printer, the fan should be on the ...

...p4014 probleme error 5704 A 57 error is a fan issue, one of the fans is not turning or is turning too slowly.In this case it is likely the fan closest to the back on the left hand side of the

HP Printer 57 Fan Error in 2600n printer it is non replaceble part error in this error we hv to replace the engine control card / clean the fan it may b resolved ur problem.....................

laserjet error code 57.07 error 57 errors refer to fan failure, 57.7 is the "optional duplexer fan failure"-if that is your code rather than 57.07, you will need to replace the duplexer.

...fan error has occurred the .4 points to the formatter fan (F1) is bad. Connector J1004. Voltage should be 24 VDC between pins 1 & 3. If it is, then replace the fan, if it isn't, replace the DC ...