Question about HP Office Equipment & Supplies
free cloth to clean each print cartridge by wiping once from the bottom of the copper contact strip to the top. 6. To insert each cartridge, tilt the cartridge towards you as you are inserting it into
...free the cartridge cradle, and turn the printer back on." But when I look at the cartridge cradle it seems to be moving fine. when you open the cover of the printer where is the cradle located? ...
...cradle cannot move and have to hit the cancle button. The printer will reset and then work for a copy or two and do the same thing. hi, this seems to be a hardware problem..... anyway try this... > ...
free cloth. Do not touch or wipe the nozzle plate. If a faulty cartridge is still indicated after verifying the cartridge part number and cleaning the contacts on the cartridge, replace the cartridge.
...cartridge cradle gently to the left. Over to the right at it's usual resting place you will see a small pad about 1cm square. This pad and the area around should be covered with ink. Get a microfibre ...
...cartridge cradle gently to the left. Over to the right at it's usual resting place you will see a small pad about 1cm square. This pad and the area around should be covered with ink. Get a microfibre ...
Question about HP Office Equipment & Supplies
...cartridge problems have been on the rise recently and that is for ALL makes of printer. If you try to clean the contacts be VERY careful cleaning contacts and ONLY use isopropynol on a lint free bud ...
Question about HP Office Equipment & Supplies
...cartridge cradle gently to the left. 3. Over to the right at it's usual resting place you will see a small pad about 1cm square. This pad and the area around should be covered with ink. 4. Get a ...
...working properly. It's just not outputting anything to the printed pages. What could the matter be? Thank you for your quick response. Sincerely, Iris Brand Turn on printer, press cartridge button, ...
and a lint-free cloth or cotton swab, then reinstall the cartridge (clean the cartridge-side contacts as well). If it still does not work, could be the contact ribbon wire which got loose, or damaged
1,177 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions