Question about HP Office Equipment & Supplies
...turn. Are these gears supposed to turn freely when the cartridge is out of the machine or is there a contact or release that is supposed to free the roller to turn when inserted? The gears just grind ...
Question about HP Office Equipment & Supplies
...turn the other gears and makes the popping or grinding sound when the gear teeth slip. You will need to replace the motor gear, it is available here: ...
...feed paper How to clean rollers and the duplexer in back Problem: The 'drop down paper grabber' gears are not turning, and the printer gives you an error saying to make sure there is paper in the ...
Question about Sharp Office Equipment & Supplies
Makes a sound like a plastic gear is stripped then shuts down. It will begin to turn on then there is a sound like a gear that is stripping. I turn the machine off because of the sound. I will not ...
Question about HP Office Equipment & Supplies
...gears are not turning the cartridge rollers properly. This would be why it probably doesn't knock with the door open when you run a motor test. Take the Cartridge out, close the door, and and let the ...
Question about HP Office Equipment & Supplies
...and partially reach the gears with the paper jam, after removing the back cover. Is there a way to turn the gears manually to remove the paper? Any other solutions? Turn the rollers with your ...
Loud clattering noise On startup, during the short warmup cycle, while printing, and while occasionally cycling hen left on but not being used, the machine makes a really loud clattering noise -- ...
Question about HP Office Equipment & Supplies
...Turn the printer off. 8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers. 9. Move it up and down ...
Question about Konica Minolta Office Equipment & Supplies
gears are not moving therefore heavy noise appears at the time of start,checked all gears found ok,please give some solun so that i can proceed further. try turning the motor that controls the gears ...
...turn freely. i changed the gears but it still very stiff and cant turn freely. please is there a way of making it turn freely with my hands? Remove the tank & pure down all the developer, use ...
1,177 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions