Question about HP LaserJet Office Equipment & Supplies
...paper sensor flag & flag spring, found any dis location? correct it.Most of the cases spring dis location observed (see the snap shot for easy recognition)#clean fuser paper out sensor as well as ...
Question about HP LaserJet Office Equipment & Supplies
paper sensor located under the registration assembly.. In case this sensor dusty malfunction or flag damage, paper wont sense. result paper damage..3.Fusing area. If the paper travels up to fuser
...paper sensor. can be one of the following locations. ? TRAY 2 Remove the tray, and then check the paper path for obstructions. Perform a manual sensor test and observe the prefeed sensor (PS102) ...
Question about HP LaserJet Office Equipment & Supplies
...sensor is defective. 13.14 For Laserjet 5si. This error is caused by a defective paper control PCA Replace paper control PCA. 13.20 Paper Jam Check Rear Door Media stopped in the paper path during ...
triangle red light is flashing HP laser jet 1022 check paper jams, open back over check paper path sensor flag and cartridge sensor flag for dislocation or spring mis place..
Question about HP LaserJet Office Equipment & Supplies
paper exit sensor in the fuser. They can break easily. If so, then you'll have to get the sensor flag or a whole new sensor. Check with a local repair shop. They should have the sensor and can install
paper that blocks path or trips a sensor. The printer will usually throw up a error code 13.XX on the display and the XX is a number that will indicate where in the paper path this error most probably
Question about HP LaserJet Office Equipment & Supplies
...sensor, which tells the printer to stop printing, because any more paper exiting the printer will hit the paper stack in the output bin causing a massive jam. Look at the exit on the printer and you ...
Question about HP LaserJet Office Equipment & Supplies
...rolling the fuser assembly when the paper was ejected. Without the flag, the sensor would disengage the fuser prematurely and stop ejecting the paper while the paper was still in the fuser. ...
Question about HP LaserJet Office Equipment & Supplies
...Paper ??? That machine has a sensor lever that pulls a flag out of the way when paper is full. When dust and toner cover the sensor it can't tell when the flag is moved. It's best when you remove the ...
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions
