Question about HP LaserJet Office Equipment & Supplies
it is jjust one color. Replace that toner since the wiper blade is not working. If it any or all colors try taking out the fuser and seeing if the image is laft on it. The fuser is under the top panel
Is the image repeating itself down the page? Are all of the colors repeating? If just one color, replace that toner cartridge. The wiper blade has gone bad internally. If all colors, replace the fuser
Question about HP LaserJet Office Equipment & Supplies
...fuser? You have a scratch or a void in the toner wiper. Locate and check the printer drum. You should be able to see the mark that is causing the line on your page. It could be a scratch or a ring of ...
Question about HP LaserJet Office Equipment & Supplies
...wiper blade and doctor blade or buy an OEM cartridge. If the printer has been heavily used it could also be that the fuser is on the way out. Hope it helps - i see hundreds of these types of printing ...
...fuser assembly. I too began to have vertical grey streaks on output from my trusty LaserJet 4 Plus. If I printed a page from text pad with just a single period on it the streaks were there, varying ...
Question about HP LaserJet Office Equipment & Supplies
...FUSER WIPER IN A LEXMARK T634? WE HAVE A LEXMARK T634 AND WE ARE HAVING PROBLEMS WITH OUR LABELS AND WE HAVE DECIDED THAT IT MIGHT HAVE SOMETHING TO DO WITH THE FUSER WIPERS SINCE THERE HASN'T BEEN ...
...start printing a report the printer makes a squeaking noise why would this happen? remove the fuser wiper if the noise is still present remove the fuser and turn by hand. fuser bearings will cause ...
...it? remove cover over top of fuser, it goes under that the fuser cover is located right under where the paper comes out of the top of the printer. the part you are refering to if the fuser
...fuser, remove the toner wiper on top, and then remove the fuser. On one side of the fuser, you'll have a protruded plastic piece with two screws in it. Remove that piece and you'll see one more very ...
fuser taken apart and rebuilt. There are wicks and wiper blades that wear out. Then they do you get excessive oil on the paper and pretty much everywhere. If your doing it yourself I can provide you a
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions