Question about HP LaserJet Office Equipment & Supplies
...usb cable & check whether system recognized the printer? if no replace the Formatter assm, if yes re install the drivers with original CD.. check.. Firmwre corrupt Ready 2 ...
...recongized by the PC through the USB cord. It keeps saying printer offline. Uninstalled programming and tried again. Still nothing. It might be USB divice faulty in Formatter.. Replace formatter
Question about HP LaserJet Office Equipment & Supplies
...formatter allows PC to communicate to printer by USB or via network. Try printing the configuration page if this page prints correctly then you know that engine controller and the formatter are ...
Question about HP LaserJet Office Equipment & Supplies
...USB and parallel (no networking) then the formatter should be Q7847-61006 and if it has built in network and USB (P3005N and P3005DN) then its a Q7848-61006. Liberty Parts Team at lbrty.com (Colleen ...
t recognize usb connection. check follows :- Computer's USB Ports are Working or not ? Printer's USB cable is ok or not ? Printer's USB Port is ok or Not ? Change Printer's (Logic Card )Formatter Card
...a 49.4C02 Error on the HP LaserJet P3005. The P3005 is known to have problems with a chip on the formatter, gives various errors to include the 49.2d9d, blank display and others. HP has not issued ...
Question about HP LaserJet Office Equipment & Supplies
usb cables and power cycle printer. If it comes to ready good. 2. After making sure that all print jobs are cleared from printer queues, reconnect the network cable or parallel cable. If printer stays
Question about HP LaserJet Office Equipment & Supplies
...board which is having usb port, carefully remove & fix it to 2055 formatter board. If you are technical guy go to TV repair shop & get it done.. many HP laserjet P2055 usb not detected
...USB device, and then turn the product off and then on. 3. Remove and then reinstall the formatter. (the formatter is the logic board) 4. If the error persists, remove the formatter and perform an ...
...usb cables from printer and try to restart. If printer will restart and comes to ready you need to update the firmware. If you still get the error then either the memory on the formatter is bad, the ...
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions