...it into the single jack on one side of the splitter. Then run a new line cord from one of the two jacks on the other side back to your computer. Plug the cord to the fax machine into the other
Question about HP Office Equipment & Supplies
...plug my computer into an officejet 6210 I am trying to print from an officejet all in one 6210, it is not connected to a computer and I have no idea where to plug it in at and where the plug goes. Or ...
...computer it is so easy 1- plug the printer into your computer via usb cord .. Install canon pixmaMG5220 software which allows you to acces to SD card 2-plug the sd card in your card reader than plug ...
Question about Epson Office Equipment & Supplies
...plug in the computer and a USB-B to plug into the scanner. Conversely it may also have a 1394 or Firewire plug also which you can use if your computer has a firewire plug. The connection process ...
...computer plug the lead in their might be picture of printer on back of computer it will be small and near a printer port. The port in back of your computer is about 2 inches long or about 5 or 6 cm ...
...unplug the usd or whatever plug you have to the computer and thn unplug the power to the printer then restart computer . then plug everything back in but plug in power plug furst. i hope this ...
...plug in the printer to the computer? Need to known what plug it is to answer that if its a usb plug it goes to the usb port but if its the big printer plug you would have a slot on the back of you ...
...with Computer * I have a C5150n at my work that use to work just fine through a P2P network. It was plugged into Computer 1 and I was always able to print from Computer 2. Now computer 1 doesn't ...
...plug after 30 seconds. When the printer turns on, reconnect it to the computer. Wait until your computer fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If ...
...computer first then plug the printer in. Since you did not say much I assumed you tried to just plug the printer in and have it work lol. The drivers have to be installed first so the computer can ...
1,052 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions