Question about HP Office Equipment & Supplies
...button. Hold down for 30 seconds then plug the system back in and do a test print then tr and print off the internet. If that doesnt work then unistall the Printer software and reinstall the
Question about IBM Office Equipment & Supplies
...before end of job, doesnt give any error. It will start printing a payslip and then stops for a few seconds, print another 2 or 3 lines and then stops not finishing the slip. Add memory to the ...
...print any document just to make sure that printer is connected properly to the computer. If it is printing than try to scan from computer , i mean there must be a icon in your computer "Hp Director", ...
...doesnt print My printer just stopped printing the color blue. I have run many tests, cleaned the print head many times, checked that there was blue ink in the cartridge, and still there is absolutely ...
Question about Canon Office Equipment & Supplies
...to my printer. it says printing then about 30 seconds later says error-printing. the printer doesnt seem to recognize that anything is being sent. Try connecting to your printer using a wire, ...
...in laptop, but it does not print. press the green button on the top of the printer for 3 seconds .a test print will get printed. if it doesnt check that u have removed the seal of the new catridge
and hold the only button on the unit for 10-30 seconds , it will print a status page. if that doesnt work hold the button down, power off and on, keep the button pushed until it prints the status page
...advice Clean the nozzles by holding down the ink button for 5 seconds while the printer is on and after that try to print something if it doesnt work then its already considered as a hardware ...
Question about HP Office Equipment & Supplies
doesnt print, it prints before but now it doesnt. appears online and ready on the computer. the light on the power button is blinking, the printer doesnt print at all. it appears online and ready, the
...print. amber light blinking. Had this problem before and was told to hold down the power button 30 seconds. It started printing. Now, has quit printing and the amber light is blinking. Holding the ...
1,052 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions