HP LaserJet 4650n Printer "fuser scratch" Questions

...I had a similar problem sometime ago, where the fuser got some scratch damage for unknown reasons and i suppose was causing unfused ink to accumulate after the fuser, leaving streaks on

...is a line down the middle of the page and paper looks damaged Hello, Your printer has a scratched fuser heat roller. This model like several other HP laser-jet units use a Teflon coated fuser

...scratch on the drum or a dirty charging corona wire. Order a new drum and clean the Corona with a brush. Image of Corona This should resolve the issue. Thanks, ArmyMason Image defects on LJ printers ...

...hp 4250 dtn printer is carying(repeating) about an inch of text down the page three times as if the fuser is not working on that particular portion only From the servivce manual: Basically: 1 Inspect ...

...fuser has a mark/scratch on it, and the coating is torn..possible outside chance that its drum but that dont cause creasing, only fuser does, maybe you have both problems If you take a look at the ...

...scratch or dirty transfer roller, or scratched or dirty heat roller in the fuser, Last but not least is dirty exit roller. the first step to any print quality defect is to cahnge the toner cartridge. ...

...and when I print there is line through the middle of paper or picture. Replaced cartridges and fuser. Not sure what to do. Probable : Dirty paper Xport rollers Possible : Main molibdene shaft ...

copies have lines through out it. How do you get rid of the lines on copies? check fuser assyembly there may be scratch on pressor roller

...unit or a contaminated trasfer roller... And the shadow is probably a broken MICA ROLLER in the FUSER, To get rid of the line (if the drum is OK) you need a mantenance KIT for that model, (pickup ...

scratching bits off 200gsm what? Usually there's a setting for thicker papers, which slows down the fuser, so that the card gets heated right the way through and the toner will adhere better