...the printer off, then press again to turn it back on 2) If problem persists, turn off the printer 3) Disconnect the power cord from the power source 4) Reconnect the power cord 5) Turn the printer ...
...Turn the power off and hold the reset button (button closest to the back of the printer) for LESS than 20 seconds while turning the printer on. Reset the NVRAM: Turn the power off and hold the reset ...
...turn off. After a few seconds, the attention light will turn on followed by ready light and the green light. Keep pressing the green button. In a few seconds, the attention light and the ready light ...
Question about HP DeskJet Office Equipment & Supplies
...turn off computer remove the 2 ink cartridges, press power to turn off printer unplug printer from ac outlet wait 3 minutes plug back printer turn on printer wait until printer stop reinstall both ...
...off.) 3. Turn the printer on, load some paper, and press the Form Feed button. 4. Watch the paper as it feeds through and try to determine where the jam is occurring. 5. Check to see if all the ...
...turn off the printer, and then press it again to turn on the printer. If the problem persists, turn off the printer. Disconnect the power cable from the power source. Reconnect the power cord. Turn ...
...process. If that doesn't work try this: Turn it off, take cartridges out, turn it back on, turn it off again put the cartridges back in and turn it on. If none of that helped reply with more
...light. I have tried turning off my computer and printer and restarting it and that hasn't helped. remove ur cartridge keep it out now turn of and turn on.. all this with a time gap of 2-3
Question about HP DeskJet Office Equipment & Supplies
...prints code. how do you clear the error? Hi, On my HP it is not enough to just turn it off. Try unplugging it for ten minutes. Works for me. Hope this Helps, RSMITH972278 P.S. PLEASE RATE MY ...
Question about HP DeskJet Office Equipment & Supplies
...off. Need to turn it back on. Printer is a color printer. Color ink ran out, and when it was replaced, it would not print in color. Under Printer Properties, the color feature is turned off. Need to ...
17 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions