HP DesignJet 500 InkJet Printer "cartridge tray" Questions

for replacement? HiTurn the printer on.Open the cartridge access door right above the paper output tray.The cartridge carriage will move the cartridges into the middle so you can access them.Good luck

...cover Have removed screws but cover won't come out because cartridge tray is in way If you have removed all five required screws you should be able to slide the left cover off without

...cartridge tray is not moving smooth and quits after it starts. Also we are getting an error message to turn of the power and check cartridge path but there isn't any obstructions. If you know of a ...

...ink at the back of the plotter just behind the cyan ink cartrige. The leak is from the cyan ink cartridge or from the connections in the ink tube system. Replace the ink cartridge first. If that ...

...cartridge indication for replacement some symbol my blinking in display for user attention this also indicate for error in plotter check for display icon and if you find any special icon other than ...

...tray. I'm not sure if I screwed something up when I did this. I ordered another printhead thinking maybe the first one I ordered was bad. When the second one came in I installed it and the blinking ...

...tray 3. Remove the spacer from inside the print cartridge area. Load all paper trays. Pull the paper trays completely out of the printer. Press the blue tab on the rear paper length guide and adjust ...

tray, and then try the alignment again. Press Setup. Press 6 to select Tools. Press 2 to select Align Print Cartridge. The unit prints a print cartridge alignment sheet. Load the alignment sheet print

...cartridge. The tray that the two cartridges sit won't move & the lip oh this tray restricts access to inserting either cartridge. This sliding tray is about 3 inches away from the right side. I tried ...

...â?¢ The top cover is open. Close the top cover. â?¢ The paper tray is empty. Load paper in the tray. â?¢ A toner cartridge is not installed. Install a toner