HP LaserJet 2840 All-In-One Printer "drum error code" Questions

after I have tried to clear error code 59.51 Book says that it is the cyan drum drive assembly that needs replacing. Part number RG5-7723-000CN. DO NOT attempt to do it yourself. A tech needs to do it

...Drum phase sensor error Check the connections. Replace the drum phase sensor for the indicated color. 54.11(K), 54.12(C), 54.13(M), or 54.14(Y) Toner sensor error Check the connections. Check the ...

Hp 3700 error code 59.90 This means the drum motor is not working correctly, either by a defective motor or a defective drum. Gerrit Jan

...error codes have to do with a motor failure of some type. I don't know anything specific about 59.0A but 59.A0 means that either the drum motor failed to start or something bad happened while it was ...

...error is the Cyan Toner/Drum cartridge is binding up and causing the motor to stop turning. I would try removing then re-installing the Cyan cartridge first and see if it goes away. If not then ...

error while using a LaserJet 4000, 4050, or 4100 fuser, you should check to see if two tabs on the fuser have come loose Turn your printer off and remove your fuser. Flip it to the gear side (the left

error messages. "Out of memory" (with no code), "40 EIO 1 Bad transmission" and "Drum kit low". It still prints (very slowly sometimes) and I've ordered the drum kit and will change when it arrives. I

...drum during a calibration cycle. Press GO. Print a configuration page and then troubleshoot as an Image-quality problem as instructed in the user manual. Check the transfer guide for cracks and ...

...Error Code. What is wrong? All drums and toners are full, all drums are new and toners are new or full. The printer worked for about 5 minutes and gets this error. Upon power down/up, it comes up ...

...drum cartridge but the HAZARD light won't go away. The self-test sequence will not complete. Pushing the button to change which color toner cartridge is accessible produces no results. Please send to ...