HP LaserJet 2840 All-In-One Printer "color print page demo" Questions

...color laserjet 2605 The colors that I see on my PC do not come out when I print the same report. The toners are new Possible causes Bad Print Drive Remanufactured Toner Cartridges Print a Demo page ...

(1)Check for printer sleave damage.... (2) check for any noise from printer when printing noise from fuser section. (3).. Print a Demo color level page ... (4)Check for scaner section ...... Thank you

...pages blank?The first thing to check would be the toner.Try printing out the supply status page (menu->information->print suppies status).You could also try diagnostics-> PQ ...

print the Coniguration page and demos? If so, somehow you may the settings to the printer wrong. If you select , file, then print, see that the proper printer is selected. If you can print those other

...print test page from Printer ? This will help us diagnose and isolate the issue further To print self test page ( Demo page ), do these steps below Press the <- Left arrow and -> right arrow ...

...print all of the other colors are ok on the test sheet but the magenta shows no color at all try printing the Supplies Status Page and the DEMO page. if no magenta on either page, then it sounds like ...

color fade when printing a machine advertisement brochure (full size page) with mutiple greytone photos on the page and wording on the top and bottom which consist of orange and yellow printed letters

...Color LaserJet is connected to my PC locally, if I print a configuration or demo page from the actual printer menu it works fine but if I print formt the computer it does not print, help two possible ...

...color Try to recalibrate the colors. Make sure the seal is pulled on the toner cartridge. Make sure the toner cartridge is pushed all the way in to let the sensor touch the chip on the cartridge. If ...

Page after each print. Most everytime I print something from the printer, it then prints me a "Demo Page". I am going through a TON of ink! HELP!!!!!!!!!!!!!!!!!!!! check if one of the buttons are not