Question about HP LaserJet Office Equipment & Supplies
...Tray 2 (non-bond), when tray is empty will automatically switch to Tray 3 (bond). Need to Configure HP 4050 printer to prompt 'load paper' when tray 2 is empty. Both trays have letter size. You'll ...
Question about HP LaserJet Office Equipment & Supplies
...tray 2 is loaded, the printer should take paper from tray 2 automatically when we are going to print something. reset to fatory defalt. Check the paper size settings in tray 2 paper cassette. Make ...
Question about HP LaserJet Office Equipment & Supplies
the printer only pick up paper from tray 1 I already load paper to tray 2 but the screen say ''tray 2 open or empty'' What kind of printer?
Question about HP LaserJet Office Equipment & Supplies
Tray 2 open or empty" Hi, We are getting the above error message even when the tray is closed and paper has been loaded. Please help solve this problem 1-Is the paper set correctly in the tray? if you
Question about HP LaserJet Office Equipment & Supplies
...tray 2. where is tray 2? The printer comes with one main tray which is referred to as tray 2. The bypass tray is labelled as tray 1. HI, 1) Power down and unplug the printer. 2) Go from the back of ...
Question about HP LaserJet Office Equipment & Supplies
...2 pages to print but the printer won't do the job. Other docs give no problems but this one doesn't print. The printer display gives a blinking 'PC' and after that a non-blinking 'Load Letter'. My ...
Question about HP LaserJet Office Equipment & Supplies
2 Open the Toolbox. 3 On the Troubleshooting tab, click Cleaning Page and click Print. A page with a pattern prints from the printer. 4 At the printer, remove any media from tray 1 (multipurpose tray)
Question about Sharp Office Equipment & Supplies
...2 x 11 paper type:user type 1 The tray that the copier is attempting to pull paper from is empty. You may have a tray with 8.5 X 11 paper, if you have more than 1 tray, but it is looking at an empty ...
Question about Office Equipment & Supplies
tray door isn't closed all the way. Make sure both (if you have 2 paper trays) are loaded, that the paper isn't folder and wrinkled, and ensure that the tray doors are closed firmly. Then hit start on
Question about HP LaserJet Office Equipment & Supplies
...tray 2, Plain paper. Tray is empty or media type/ size in tray is incorrect. Ensure media in tray matches printer driver or control panel setting. when you give print command go to print properties ...
549 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions