HP PSC 2410 All-In-One InkJet Printer "ribbon broken correct error" Questions

Ad

Question about Fargo Office Equipment & Supplies

2 Answers

...print Command, it gives me Error 99 with Ribbon Broken or jam but I checked the ribbon and the cards there was ant broken of card jam.please, kindly help me with the solutionThanks you ...

Ad

Question about Zebra Office Equipment & Supplies

2 Answers

...Ribbon Broken / Out of Ribbon error Hi, I have a Zebra P430i, whic will print the test card fine. However, when printing a windows test page, it will display Downloading Data, followed by "Ribbon ...

Ad

Question about Datacard Office Equipment & Supplies

1 Answer

...ribbon is broken. The error code I am receiving is PR-01724 The Printer I am using is the SP55 Plus. I am pretty certain the ribbon is not sitting correctly, as I just changed out the ribbon, but not ...

Question about HP Office Equipment & Supplies

1 Answer

...broken. could it be the reason or it is not? Please advise. The check ribbon message on the 2265 indicates the printer is detecting problems with moving the print head. You have ruled out the ribbon ...

Question about HP Office Equipment & Supplies

1 Answer

...broken and should be replaced. 6. Inspect the ribbon cables. Folded or damaged ribbon cables can cause a short that generates an error. 7. Inspect the cartridge guide rails to see if any are damaged. ...

Question about Office Equipment & Supplies

9 Answers

...Ribbon may have Broken.Repair it with adhesive tape(Go to page 16 for details) Ink ribbon corresponding to designated number of sheets has been used up.Load a new Ink ribbon and paper roll(Go to 8 ) ...

Question about HP Office Equipment & Supplies

4 Answers

...broken ribbon cable from carriage/printheads to mainboard. Break (on top ribbon cable) was just before ribbons are glued to enter inside machine (furthest point from carriage). Must be a stress point ...

Question about HP Office Equipment & Supplies

8 Answers

...ribbon has detached from the printhead carriage. Check for that. If it has simply detached, all you have to do is re hook it to the side it detached from. If it is broken, it would be less hassle for ...

Question about HP Office Equipment & Supplies

1 Answer

...ribbon cable which has blue writing on it. One can test the sensor’s movement by using a toothpick and applying slight pressure to the top part of the black sensor arm. Press very gently. Caution, do ...

Question about HP Office Equipment & Supplies

1 Answer

ribbon cables from the circuit board sockets by gently pulling them upwards using tweezers. Unplug the 3 other cables that plug into the circuit board. Be careful not to break anything associated with

Not finding what you are looking for?
HP PSC 2410 All-In-One InkJet Printer Logo

747 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...