HP OfficeJet 7410 All-In-One InkJet Printer "error cartidge door" Questions

Error - "Close cartidge access door" I keep getting "Door Open, Close cartridge acess door" error. Where is the sensor for the door? By a door edge or on a hong extentionLook for a wire going to the ...

door just above the paper tray. Pull out the old cartidge, hold it so you can see the way it is inserted and click in gently in the same way. I cannot remove the cartridges to my 5610 officejet all in

...error as soon as you turn on your printer with no tasks in progress, then check for any piece of paper stuck in the carriage. Remove the paper carefully. If the paper tears, part of it might remain ...

...error message after friend replaced a cartridge in HP7410xi printer. It said to replace a cartridge in right stall. After doing that I got the same message. So I started to investigate and found that ...

door, unplug, let the print cartridge move all the way to the left. Check where the cartridges usually sit on the right side, I found a BIG GLOB of sticky ink that had been leaking probably for years.

Error message coming up: The HP LaserJet 1020 has the front cover door open or the toner cartidge is missing... Door is closed and toner cartridge is in there!! HELP!! send your printer for service. ...

error (ch) CH steady means cover is open. Close either front or right cover well. CH blinking means developer unit or toner cartridge not installed. Remove and return well and firmly. CH cover open or

...cartidge is installed! The ok button on the touchscreen also doesn't seem to register and I get an error message that says that the door is opened when it is not. Help! plz ask your vendor for ...

error message remain It sounds like you are replacing the toner cartidges NOT the Drum Unit. Drum is located behind the toner cartidge and you will see it after removing toner. Pretty common mistake :

...cartidge and insert it back while looking on the lever movements.... and you ll get whats the matter with it.. PLEASE note it,,, that i think,, the sensors are NEVER damaged !!! mind it.....my ...