Question about HP OfficeJet Office Equipment & Supplies
...side of the unit. Wait until the print carriage is idle and silent, and then lightly press down on a print cartridge to release it. When replacing the tri-color print cartridge, remove the print ...
...left side of the printer , if you look at it from the back. First of all, there is no "card" to be removed, since it is placed somewhere in the printer but it's not connected directly to the board: ...
Question about HP OfficeJet Office Equipment & Supplies
left side of the printers main circuit board. There are marked with + and - signs at their opposite poles. Breaking the connection on that battery will erase the memory settings of the CMOS style chip
Question about HP OfficeJet Office Equipment & Supplies
...left hand side op the paper I do not know how to fix the print when printing a document it gets cut off on the left hand side of the paper. currently our computer tecks adjusted my margins on my ...
Question about HP OfficeJet Office Equipment & Supplies
...left side to lock & bring the cutter to cut the paper, but if its not reaching proper calculated destination due to dirty or damaged encoder, it wont lock the cutter to bring it out result paper ...
...left side of the carriage. Usually if it has fallen out, it can be found in the far left end of the printer, so you have to stop the printer, lift the lid and stick your hand into the left cave. ...
...left side, about one letter of text, is cut off. Have tried reinserting the ink cartridge and making sure that paper is all the way to the right when in paper holder. This did'nt help. Have had ...
Question about Canon Office Equipment & Supplies
left of the document is cut off. If you copy (either on the glass or with the feeder on top), then the image shifts to the right and the far right side of the image gets cut off. Any suggestions would
Question about HP Office Equipment & Supplies
...left slide to the edge of the paper. You may also need to reset the paper side when you print your photo. When I first start out, I cut plain paper the size I want and test it out, both for printing ...
left side inside of the machine. This is happening because the carriage is moving left to enable knife to cutting position, and sometimes the knife is going off his position. Take a better look inside
898 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions
