HP OfficeJet 7410 All-In-One InkJet Printer "back hinges broken" Questions

...the top of the hinge. Remove the broken top half of the hinge and lower the cover back down. Until you find a replacement hinge, you can put a piece of heavy duty tape on the back where the hinge

...hinges. Let me know if you find a source for replacements. In the mean time, I kept my unit working by just removing the broken top half of the hinge. You have to remove 5 screws using a TORX T10 ...

...broken top half of the hinge and lower the cover back down. Until you find a replacement hinge, you can put a piece of heavy duty tape on the back where the hinge was. Hi, Normally the parts are not ...

hinges inserted into the back of the cabinet. Take the top hinge of the cartridge door off with the 2 tork screws holding it, using a small screw driver. Go to a hardware store & pick up a pair of

...hinges. You will need a small T15 TORX screww driver to remove them.I had to break off the back right hing in mine - the left was already broken. put the top back on - and the error messages ...

...hinges in the back seems to be apart. I don't know if I broke it or just pulled it apart. I can't seem to get it back together. If it's broken, you can't get it back together and your prrinter won't ...

...ink cartridge if its not designed to slide back in, it may be broken. if its broken then you have 3 options: 1. ignore it 2. have it proffesionally fixed 3. get creative (duct tape, super glue,

...back left corner, there's a plastic piece that fits between a horseshoe shaped sensor down near the hinge for the cover. If the plastic piece is broken you can place something in the slot and it will ...

...back of the all-in-one. When reset displays, release both buttons. Try the print job again to see if this step resolved the issue. If the issue is resolved , you do not need to continue with the rest ...

part=CB029A The hinge is here: http://www.partshere.com/online/detail.asp?partno=CB029-HINGE First, though, I have to figure out how to get the broken hinge off. The screw on the back will not unscrew