Question about HP LaserJet Office Equipment & Supplies
...left side Hi - I have a 3380 All in One - the paper is wrinkling on the left side every time I print/copy. I noticed a ticking kind of noise starting a few days ago, before the wrinkling started. I ...
Question about HP LaserJet Office Equipment & Supplies
...wrinkles on left side when printing paper wrinkles on left side when you print Fuser is worn out (specifically, the pressure roller). It is the fuser film. Most of these printers will have this ...
...wrinkles every time This happens on left side as paper comes around from back after it's imprinted. I got the machine from computer teacher. I replaced the toner cartrige (made in China) ... I do not ...
Question about HP LaserJet Office Equipment & Supplies
...left side. appears as if something is wrapped around a roller but can't see it If you have ever used sheet label stock, you may have some residue of the adhesive contaminating a roller in the ...
...left side of the device (callout 3). Remove three self-tapping screws (callout 4) and one grounding screw (callout 5). Tilt the fuser slightly toward the back of the device, and then slide the fuser ...
Question about HP LaserJet Office Equipment & Supplies
...left and right side of the two-sided printing accessory. Remove the accessory by pulling it away from the printer Gently pull the paper out of the rollers. Clean the rollers with a lint-free cloth ...
side of the media that is most visible (this includes the middle), and carefully pull it free from the device. Replace the input tray into the device. Figure 7: Replacing input tray After clearing the
Question about HP LaserJet Office Equipment & Supplies
...left side and wrinkles up the paper on the left side It only prints half on the page on the left side & it is wrinkling up the paper on the left side as well. Hi there it could be that the fuser or ...
...left side of the page. I'm not able top see any jammed paper when I open the front of the machine as if I were putting in new ink. bom dia, minha al 800 travou com a queda de energia e aparece h 4 ...
Question about HP LaserJet Office Equipment & Supplies
...left side. I would seem to think there is needing to be an adjustment done to a roller or something? Hy the problem is: You have to clean the 2nd BTR and the transfer belt cleaner. There is a large ...
435 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions