HP LaserJet 1300 Printer "put cartridge" Questions

put the black cartridge in a different slot i.e. yellow. If the black cartridge in the yellow slot still puts black dots on the page...it is bad. Can you put the original old black back in the printer

cartridge. Put the tab in the printcartridge box to return for recycling. 4.Insert the new print cartridge in the printer, making sure that the print cartridge is inposition. Close the print cartridge

...previous cartridge ran out so I put this cartridge in from another working 3500. Why won't it print? HP put chips in there cartridges to stop you from interchanging cartridges from printer to

put a chip into the cartridge that make it so you have to kinda use there toner. When third partys manufacture cartridges sometimes there chip they use is not compatible with your printer. Another way

...put in a new cartridge. Prints magenta, cyan, yellow, but no black. HELP! Run the PQ troubleshooting diagnostic. See if the black is printing. If not, run the Disable Cartridge check. This will allow ...

put in a yellow cartridge. Previously the printer was working just fine. Now it is showing an error code: 10.92.00 So I put the old yellow cartridge back in. The same error code now appears? He I just

...cartridge, it's a good bet that the black is bad. Put the old black in the printer and see if the error goes away. Open and close the front door slowly and look at the cartridges. You should see ...

...Put the cyan in the black cartridge slot. print a config page. If it is all blue, you have another bad cartridge. If it prints correctly(minus the other colors)...continue Now put the magenta in the ...

...cartridge, put the old one back in to confirm whether the issue is the printer or the cartridge. Did anything odd like a paper jam happen just before this started. If so, there might be some paper ...

...for paper jam there is none. i turned off and on but still not working. are you sure you have put the cartridge in correctly, remove cartridge and put again carefully. i can't remove the ...