HP LaserJet 1300 Printer "printing black page" Questions

...black printing (over two-thirds of the pages are black only), change the printer settings to MOSTLY BLACK PAGES. Setting the color/black mix 1. Press Menu to enter the MENUS. 2. Press to highlight ...

Won't print in color All cartridges are new...report shows 0 pages for yellow left yet all others added at the same time show thousands of pages left. Everything printed is in black with no color. BTW

...printing black on right side of doucements Run the PQ Troubleshooting diagnostic Check out the BLACK page. You can also run the Disable Cartridge Check diag. This test will enable you to pull all the ...

printing entire page black I changed the black toner cartridge yesterday and now whenever I print anything, the entire page is black. I cannot read anything on the page. I am assuming it has something

...page with black ink. Does the black page come out first, and then your original print comes out fine ? If yes, you might try to update/replace your driver. Print from several applications and see if ...

black and white letter, the page still gets printed in pink, and the black letters are printed as black. The print server is a centos 4.4 machine, we have had no problem before using linux and it runs

printing all black from Word, no dots appear. I thought changing the transfer kit and fuser would do the trick. I have also cleaned the machine per HP instructions. Anyone have any ideas? Try to print

black won't print across the page My HP Color LaserJet 2600n has been having printing problems lately. The magenta and blue cartridges were running low, so I replaced the cartridges, however, it never

...black page stops printing, and just the type comes up. Can you help????? You didn't say that you swapped out the toner. Let's come back to that point later. Put paper in the manual feed tray. Print ...

printing black on the entire page. Hi, I hav HP Laserjet 1018 printer which is printing on black color on the entire page without no content on it. how do I resolve it. for your info I have ...