...Check toner cartradge , if you are not expert read the instruction of installing new one, I mean you have to remove the toner seal. replace it by well known good one (used one). step #2 if above not ...
...is no error code showing and I checked the toner hopper connector and that is connected. there is a small connector just below the toner hopper check the connector and connect it
...toner bottle/adapter back off of the machine. ...check the hopper connector if connected...then install a toner by pressing *28*then copier then function then install...then press the ok in the ...
...error indicating that the connection for the developing hopper toner sensor is not detected at power on. Check this connection and the toner sensor for the hopper may need to be replaced. Good
...toner botle motor connection detection error. 1- check the connector for any fault in connection. 2- replace the motor I've checked the connector for any fault in connection. and replace the motor. ...
Question about Canon Office Equipment & Supplies
...screw rotates, wait and see whathappens; if the screw does not rotate, replace the waste toner feedingunit. try to check the spring connected to waste tank, if doest rotate try to clean or replace ...
toner. check the sensor, If you have knowledge enough to dis-assembly the the hopper assy. check the worm gear connected to a small motor driving toner gear. clean the sensor( may toner got inside the
Question about Canon Office Equipment & Supplies
...toner? NO: Check the hopper toner sensor. Hopper connector, Hopper supply motor (M10) 5) Is the connection of the hopper connector normal? NO: Connect the connector securely. YES: Check the hopper ...
Question about Canon Office Equipment & Supplies
...and open the front cover and check the yellow jack of developing assembly if not connect first connect. if it already connected remove the Developing assembly and dump some toner problem may
...the bottle moter is faulty for the E025. The ' 0000 " is for the sub hopper toner sensor connection is absent. Replace the sub hopper toner sensor, check connectors, or replace the detection
435 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions