...the gear tooth are smaller than before, if there is any sign of powderized palstic all around then gears need to be changed no amount of lubrication can corrrect this. also check the orientation of ...
Question about HP LaserJet Office Equipment & Supplies
...Could it be more like a clicking or grinding noise? That would be the swing plate assembly gears. Those gears connect the drive system to the fuser, driving the fuser gears. There is no ...
...Realigned how? You have to disassemble the unit, remove the carousel assembly and align the small gears on top to the alignment marks on the big black gears. The white gears have 2 protrusions that ...
Question about HP LaserJet Office Equipment & Supplies
assembly area. It sounds more like it is coming from the output assembly or possibly the network of gears. This can also be caused by the fuser gears. Take out the fuser and look at the gear to see if
hp 2420 side wheels are troubling In this series fuser driving gears (especially 20T gear) are observed warn-out in many cases.. feeling like grinding sound, replace with 20t gear , apply grease for ...
Question about HP LaserJet Office Equipment & Supplies
...the copier M5033 MFP is giving me a knocking sound , how do I solve it ? Knocking usually means the gears are not turning the cartridge rollers properly. This would be why it probably doesn't knock ...
hp laser jet 4 plus gear noise Need p/n for the gear behind the fuser on the left top side. That gear is called the "fixing coupler gear" and is part number RF5-0350. You can get them here:http:
groaning noise Remove back door & fuser assm, in fuser driving gear mechanism located left side replace 19 teeth gear..see the link for the gear recognition.. ...
...has a noise (sound) and can't print properly what is the problem? drum? Txs You need to change Gears ( Two white gears), you need to open the rear all the way in, to reach the gear system. take ...
314 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions