fold the paper on one corner. I did a full p.m. and. test. The pages will print but some of the pages are folded at the top corner and is printed on the backside. What causes this to happen. The paper
Question about HP LaserJet Office Equipment & Supplies
...corner of the sheet as it exits the paper path to print on other side of sheet replace the FUSER Assy. This is due to the paper pickup assy, when the paper is being fed back through the paper pickup ...
Question about HP LaserJet Office Equipment & Supplies
...corner and a creased fold about 1 inch long. It would be like holding a piece of paper and folding the corner Open the back of the printer - make sure it is clear. Then remove the toner check ...
corner of the paper will be folded or it has been folded earlier and now it is straight then also that paper will be jammed. So use new unfoiled paper.While inserting it see it is straight in the tray
Question about HP LaserJet Office Equipment & Supplies
...corner by about half and inch. it has had a maintnenace kit, and clean can't see any blockages, nor internal issues. very frustrating. fold happens when paper passes through tray one and onto the ...
...fold in the right hand corner of the paper when we print it out. We cannot find any paper stuck anywhere. We can't download the repai manual. The Printer's Fixing Film on the fuser assy is broken. It ...
Question about HP LaserJet Office Equipment & Supplies
...paper that comes out as someone prints has a corner folded. It is obvious to me that there was a paper jam but I don't see any paper. What would be helpful is a diagram of the paper path so I can ...
Question about HP LaserJet Office Equipment & Supplies
Paper is coming out scrunched (folded) and sometimes torn at the top left corner. Make sure the printer is clear of any paper jams and don't load the tray full of paper, load it 75% full but not 100%.
Question about HP LaserJet Office Equipment & Supplies
corner fold I'm having the same problem. the upper left corner of each page folds. This tells me something is getting caught usually I would recheck the Paper Tray. If possible you could run the paper
...corner to fold over when the paper is pulled through. I would try checking the feed rollers in either the actual tray or the back of the printer. Another thing to check is the other tray (the manual ...
313 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions