...pinch rollers .It wont pull paper in to printer ... You need to clean the pinch roller at the back of the printer using a cleaning sheet. These come with packs of Epson Photo Paper and are slightly ...
...paper pickup unit (above the cassette). The pickup roller is the smaller roller, and the feed roller is the larger roller. 3 Pinch the tab on the end of the cassette pickup roller (callout 1), and ...
...(located inside the unit, not the load tray) w/my fingernail to "rough it up." Also gently lifted the load tray until the paper was fully "engaged" by the three pinch rollers. Woiked like a
pinch roller. I have tried various thicknees of paper, but no luck. I tried the laserjet cleaning paper but still no luck. Is there a way to adjust the pinch? Walter [email protected] You may need
...pinch roller is the rubber roller that grips and pulls the paper. Photo paper is much smoother so it is harder to get a grip. There should be a adjustment for the thickness of the paper. This will be ...
...pinch rollers seemed to spin without advancing the paper, even if the paper was fed one sheet at a time. Solution: Clean the rubber pinch rollers with isopropyl rubbing alcohol. Partial ...
...paper path above tray 2, there are 2 pinch rollers that sometimes pop out of place. This can be checked by removed tray 2 and looking underneath where the paper travels. You will see 2 white rollers. ...
pinch the paper just before the paper drops onto the output area. The problem is that those rollers aren't turning for some reason. So the paper is fed through the machine, the imaging drum is putting
PAPER, COPIER NEEDS TO BE SERVICED AND ADJUSTMENTS NEED TO BE MADE ON THE PICKUP TRAY, SERVICE TECHN WILL KNOW WHAT TO DO TO FIX THE ISSUES TO THE MACHINE. ROD replace the feed rollers. In a pinch you
430 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions