HP Color LaserJet 3500 Printer "sensor" Questions

...see anything that is not supposed to be there. Your best method of troubleshooting is the manual sensor test as this is a generic paper jam error. on your sensor tests: 0 = off 1 = on A = TOP OF ...

clean sensor Your response to a problem with a clean sensor error was----The sensor it refers to is the density sensor located inside the machine via the right hand door. Open it and clean the large ...

Error 13.20.00 Checked all sections and cleaned all sensors:there's no paper inside but at start up machine indicate error code 13.20.00 Can a broken cable(sensor) cause this problem? Please advice ...

...paper path is cleared but no change. 13.20.00 JAM INSIDE Paper has not moved past a certain paper sensor. can be one of the following locations. ? TRAY 2 Remove the tray, and then check the paper ...

I have a Hp Printer Mfp4345 with error message 13.01.00 I tried changing Rollers,and all the sensors and paper path is in good condition..I noticed that the tray is not lifting and i even replaced ...

how to clean a density sensor unit on a hp color laserjet 8550 my print hp laserjet 8550 is displaying ' clean density sensor, please can you explain to me how to clean it. thank you 1 Open the right ...

...see paper Computer is telling me there is a paper jam. However I can't see the paper check the sensor, could be somthing stucking on the sensor or the sensor itself could be out of place. but

problem my printer displays on the control panel clean sensors and from there it can not print or go to the ready mode.i have cleaned several sensors but still it is displaying that error on the ...

...error 13:20:00, which was jammed in the fuser, but there is no paper jam and apparently the fuser sensor also has no problem. It is most likely caused by a bad toner, or a sensor flag. Remove the ...

sensor error on hp 2600 printer please Try to clear all paper dust from the photoelectric sensors inside the printer. User compresses air, if you can find a can of it. but use it gently. You ust want ...