HP Color LaserJet 3500 Printer "registration printers continue" Questions

...continues. How can I reset it? Or do you have another solution? Thanks. Sam Remove catridge life registration assm plate check there might be small peces or sensor might be dusty.. easy method

...resolved by,Open cartridge access door & close printer automatically perform CPR (color plane registration), Calibrate(full) the printer from the PRINT QUALITY menu for three times continuously ...

...continue printing. 13.02.00 (HP 3500) 13.20.00 (HP 3700) Description A media delay jam has occurred in the registration area. Action Check for media stopped or jammed in the area of Tray 1 pick-up, ...

...registration rollers are supposed to take over, there's almost a "struggle" for the page to continue and then the paper jam message pops up. So if anyone out there has any ideas or has any experience ...

...continue its power-on sequence.If this message persists, contact an HP-authorized service or support provider.Hope this helps Please rate this solution, thanks! 51 LASER ERROR Description: Indicates ...

...registration detection assembly. Control Panel Message: Printer Error Description: Printing cannot continue. There is a sensor malfunction. XX Description 15 - Yellow toner remaining sensor (J1014 ...

...Jet 2600n: I have had this continuing problem on & off for the last year. It's a color registration problem, the colors are off-set from one another. I have the latest firmware and ...

Tally 8024 Registration Jam I cannot clear my Tally 8024 of the Registration Jam error message, I have check the printer thotoughly and do not have a paper jam anywhere, but in spite of this every ...

...continue printing. Try opening the front and right doors and then close them. Switch off and on again after 5 seconds. If jam B still there, possible causes may be: Exit sensor defective; Exit sensor ...

cant continue registration contact the company direct and talk with the department that handles the registration process