HP Color LaserJet 3500 Printer "error 30" Questions

...4700 Fuser Error Error Message 50.7 ''Fuser Error'' After replacing the fuser, it's still showing the same error message. Try unplugging the printer for 30 mins. You may still have a defective

...3330 Had error 79... My hp Laserjet 3330 Had error 79 Firmware error. Unplug the power cord. Wait 30 seconds. Plug it in, power it on. If the error comes back, you will have to upgrade the

30 seconds. Power on, If error returns...make sure that printer is plugged directly into the wall outlet. Don't use a surge protector. If you just added memory to the printer, power off and reseat

...codes 79 It's an internal firmware error. Power it off wait 30 seconds and power it on. If error code is still there, you will have to upgrade the firmware. If problem persists..replace the

...error. Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize.If the error persists, replace the scanning

...error, specifically the fuser. Turn off power for at least 30 seconds. Make sure that printer is plugged directly into wall outlet, not a surge protector. Power up and wait for initialization. If ...

...30 minutes, and then turn the printer back on. 2. If the error persists, replace the fuser hi, that error was fuser error i think your fixing ***. is defective.try to replace the heating element to ...

...error. Turn off the power using the switch, and wait at least 30 seconds. Do not use a surge protector. Plug printer directly into the wall outlet. Power on. If the error comes back, contact

...error. Action Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. If a surge protector is being used, remove it. ...

...invia e non riceve fax grazie 49 error is an internal embedded software error. 1) turn off power and wait about 30 seconds, power on and if error comes back, see step 2 2) ...