paper wrapped around inside. We recommend calling for service, but worst case is you try yourself and can't get the paper out then you would just order a new fuser. We can get you the fuser. Just call
paper wrapped around fuser When try to print the paper gets jammed and I get a message "Paper Wrapped around fuser". How do I fix? It prints but always gets jammed halfway through and gives ...
Question about HP LaserJet Office Equipment & Supplies
...paper is wrapped around fuser roll Take the fuser out of the printer after it has cooled.Turn the gears on the left side of the fuser, this will cause the rollers to turn and you should be able to ...
...paper has wrapped around the roller at the back of the printer and I am unable to get it out. Opended the back , front and side. but no luck. If you cant get paper out from inside after removing ...
Question about HP LaserJet Office Equipment & Supplies
...paper has wrapped around the rollers - remove and fit back the plate. In case of repeating problem look for damages to pressure roller and the tefflon sleeve. Have the fuser serviced in that case. ...
Question about HP LaserJet Office Equipment & Supplies
paper tray. Cannot see anything. it will probably have wrapped itself around one of the fuser rollers. You may be able to see the fuser rollers from the rear of the printer and check to see. to remove
...I have also seen the paper actually wrap around the fuser roll, which would cause the same symptoms...be careful removing the paper if that has happened...the fuser roll can be easily damaged
...wrapped around the roller? If so then the fuser will possibly need replaced. Depending on how skilled you are you could try removing the fuser and disassembling it to remove the paper but it may not ...
...paper you ran through all come out? If you used inkjet transparencies then it is possible that one of them wrapped around the fuser. Once they do this they usually harden like a sleeve and prevent ...
paper wrapped all around and stuck to them, since the fuser generates heat like an iron. Rotate the fusers main big gear to try and get the paper out. In the likely event you cannot remove it (without
129 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions