HP Officejet 7210 All-In-One InkJet Printer "saying manual feed load" Questions

manual feed slot. 7. Turn the printer off. 8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers. 9.

manual feed slot. 7. Turn the printer off. 8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers. 9.

manual feed slot. 7. Turn the printer off. 8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers. 9.

...feed fine, then before it completes, I get Out of paper. Load paper and press OK to continue. Press OK, and it says paper jam: press OK to continue. Press OK, and the paper is ejected. No tears, no ...

...Load paper in the printer" whilst there is still a lot of paper in the printer. It then stops. If you press OK on the printer it does the same again. What must I do because it is a brand new ...

...saying now. I can still print with it with no problem. Any help would be greatly appreciated. If you would prefer to send an e-mail to me, you can e-mail me at progressive_homeowner @yahoo.com . ...

...load more paper in the input tray. If there is paper in the input tray, remove the paper, tap the stack of paper against a flat surface, and reload the paper into the input tray. To continue your ...

...saying "paper out"---or not loaded properly---the printer itself doesn't say anything's wrong. Help please! disconnect the printer from the computer do a manual paper feed if it can feed paper, ...

...manual feed - load paper tray. Its a brand new printer (Brother HL-4040CDN) and the paper tray is full The printer has an "alternate" feed, i.e., for envelopes and/or for special paper. Open the door ...

...manual feed tray, not the regular paper tray. If it does not sense anything in the manual feed tray it will not continue. If you are loading the stock in the tray, it may need to be pushed further ...