HP OfficeJet 6210 All-In-One InkJet Printer "stuck initializing" Questions

...stuck on "Initializing" I have had this printer for a couple of years with zero problems. All of a sudden it won't do anything. It is stuck on "Initializing". We have rebooted. We have unplugged it ...

cartridge carriage gets stuck on the side Checkthe optical interrupter that senses the carriage end position for dust. A "blade" goes between a U shaped part that breaks an optical beam. This ...

stuck on a initializing massg on the window After pluging in and powering the printer a massg (initializing) comes on and don't do anything else. Its stay stock there nothing else happen after that. I

out the interior and trace through the route the paper takes. Look for anything the paper could get stuck on. Good Luck

initializes only will not turn on If you mean that the screen stays stuck in the boot-up mode, try this partial soltion; it's worked for nearly everone who's tried it. Unfortunantly, you lose your ...

printer is stuck on intializing Hello Francgeo ! Do a reset. A reset is initiated by either holding in the # and 4 or # and 6 while plugging in the power. Hold in the correct button combination until ...

...that appears in the Printer screen and the Button will not turn Off the Printer. It seems to be 'stuck.' The message on the computer screen is: "Print Cartridge Error" and I have removed the ...

... Nisar either there is a piece of paper so small it's hard to see,or one of you're sensors could be stuck in down position,if a sensor is down just lift it back up.if that's not the problem,i need to ...

stuck" when I turn it on(initializing) and has a grinding noise coming out of the top. It has happened a few times before and sometimes, if I wait several hours or keep cycling the on/off it will

Printer stuck on error message "Remove and check cartridge." I have replaced both color and b/w cartridges--twice--and still this message is displayed along with a flashing orange lighted exclamation ...