HP OfficeJet 6210 All-In-One InkJet Printer "screen flashing" Questions

screen with all the buttons flashing. I tried the following three steps and now have a new problem: held # and 3 while plugging power back in. held # and 6 " " held # and 9 " " Now the screen is blank

HP 7410 will not boot. It powers up and the HP logo screen flashe HP 7410 will not boot. I had a power failure over night. It powers up and the HP logo appears on the screen with a progress bar. The ...

...flashing and screen is saying busy An envelope got jammed and after removing it from the back of printer I canceled the print job, but green light continues to flash and I can't get it to ...

...flashing lights appear and it again says to Reset power. Is there another button I should be looking to reset?? VERY FRUSTRATING!!! Hi Joe, Lets try 2 steps: 1st approach: 1. With the printer ?ON? ...

flashing I replaced a new cartridge the screen indicated cartridge error What am I to do? you may have a contact error or need to replace the cartridge. remove it, insert again. if problem persist try

the screen shows 83C00009, can't reset or anything. Memory card slots light keeps flashing. First do the cut circuit: Unplug your power supply from your printer wait 10 sec. plug it back and try again

...flashing and is saying error 0x07a74dd6 on top of the screen then half way down it is saying 1659 lib_barracuda.c An '0x ...' Error Message Displays on the Front Panel When Printing HP Photosmart ...

...flash but most of the time just the camera llight on the front of the printer flashes and the screen is blank..........I have tried # 9 and # 3 but still nothing would love if u could ...

tried unplugging and plugging back in and holding down 3 and 9 still flashing and beeps error when I dial from the phone fax will not be send and error will be come on the screen. What can i do for it

...flashing When I connect the machine to the power, all the lights flash on and off non-stop. Is this a particular problem or is it just got to be thrown out? Try the steps mentioned bellow Unplug the ...