...from happening you should change Tray 2 type = Letterhead. In this way, the printer knows that the two media types aren't identical and won't pull from that tray unless you specifically tell it
...Change Tray settings. 5. Select Normal for the paper type (do not select Envelope for paper type). 6. Select Custom size. 7. Enter the envelope size. 8. Select OK three times to return to the copy ...
Question about HP Office Equipment & Supplies
change the paper in the paper tray because they want to print on both sides of the paper. This cant be right, if you print on one side, then it is the same as when it prints the first page of a duplex
...Tray 5] (Bypass) for the Paper Source. Select [Heavyweight 2 (170-220 g/m²)] for the Paper Type. Select the custom size you created for envelopes for the Output Size. Click [OK] twice to exit the ...
Question about Xerox Office Equipment & Supplies
...Tray 5] (Bypass) for the Paper Source. Select [Heavyweight 2 (170-220 g/m²)] for the Paper Type. Select the custom size you created for envelopes for the Output Size. Click [OK] twice to ...
...tray , then i selected the media source to free size regardless what you want to print for. I hope this will help I just fixed this moments ago with the following solution. The problem was my ...
...Tray detection position and correct as necessary. - - 6 M11-FN operation check PWB-A FN PJ7A FN-1 to 2 FS-508 G-7 7 PC3-FN I/O check PWB-A FN PJ12A FN-2 (ON) FS-508 G-4 8 PC14-FN I/O check PWB-B FN ...
Question about Xerox Office Equipment & Supplies
...2. Probable Causes Solutions The tray is empty. Check that at least Tray 1 is loaded with media, in place, and secure. The product?s covers aren?t closed securely. Make sure the covers are closed ...
Question about Sharp Office Equipment & Supplies
...tray you want to change the paper setting 4.Select the size and type of paper that is loaded in the tray. The currently selected paper type will be highlighted. ? To change the paper type selection, ...
Question about HP Office Equipment & Supplies
...1 letter. were as before it would automatically pull the paper from tray 1 or 2. What has changed? and can i fix it? in the printer properties during printing change the "paper size" from letter to ...
1,712 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,429 Questions
