Question about Brother Office Equipment & Supplies
...cartridge door is open The Ink cartridge door sensor is faulty/bad Something is block the ink cartridge door sensor or the notch that deactives the sensor is broken. Checkout the door and locate the ...
Question about Brother Office Equipment & Supplies
...cartridge door sensor. The clip needs to push the sensor in so the printer is able to function with the cartridge door open. If you insert the magenta cartridge first, the printer will think the ...
...sensors, unplug the machine and plug back in. (Do this without the cassette & cartridge installed but with all the covers closed) This should give you an install cartridge & cassette message. Install ...
...cartridge on a HP C6180 Photosmart printer). There is no door open. The cartridges are properly seated, and the powere supply light is lit (on the back of the printer). Any ideas on how to resolve ...
cartridge door is open....it sure doesn't look like it is. Help Hi, It is possible that the sensor/switch that is triggered by the cartridge door is falsely sensing. It may be to a defective switch or
Question about HP Office Equipment & Supplies
Printer jam warning comes up and printer won't work. There is a banging noise when I start the printer which doesn't work now. sounds to me that the locator sensor isnt recognising where the ...
...cartridge access door and verify that there are no obstructions that would prevent it from closing completely. Close the print cartridge access door and verify that it closes completely. Let the USB ...
Question about HP Office Equipment & Supplies
...cartridge, paper feed assembly, and fuser. 3. Replace any defective sensors or flags. 4. Turn the media stack over and/ or rotate it by 180 in the input tray. 13.6 Paper Jam Check Rear Door ...
Question about Canon Office Equipment & Supplies
door or panel of the printer. Wait a second or two and the ink cartridge holder should move to the opening where it is accessible. If it does not move, shut the door, turn the printer off for a moment
...cartridge. I have tried 3 different cartridges, checked the door hinges and sensors to make sure everything looked ok. No matter what I do it gives that message after it boots up. check in your ...
692 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions