...seat the belt on the pulley, once again using the freedom to move the spring-loaded pulley a bit to the right. Replace the glass strip, plastic cover, and screw. Power on the scanner. The error ...
...rear locking tabs for the rail guides are protruding through the printers frame and are properly seated and notched into place. ? If they are not properly installed and seated then remove the rail ...
...seat properly and lock in place. 13. Flip the large blue handle back into the down position as before we started this process. 14. Vacuum the two spots where the waste toner container port holes fit ...
BELT. It is to do with the foam roller in the drop down unit which contains the m ultipurpose paper feed. the problem was diving me nits as it turned up on 3 printers I look after! The solution is not
88 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions