Question about HP OfficeJet Office Equipment & Supplies
Keep getting code 0060--won't start up. How do I get it reset? Introduction You might need to perform a partial reset to restore the HP All-in-One to proper operation. A partial reset does the ...
my hp printer my officejet won't shutting down and turn on Introduction There are times when a partial reset may be required to restore the HP All-in-One to proper operation. A partial reset does the ...
Question about HP OfficeJet Office Equipment & Supplies
The incoming fax frequently chops off and only receives / prints the top 1/4 of the page. you may have a problem in your setting, restore the factory defaults
...factory default settings. Follow these steps to reset the defaults: Press Setup or Menu depending on your model. Press the Right Arrow or the Down Arrow until Maintenance or Tools appears in the ...
Question about HP OfficeJet Office Equipment & Supplies
Fax log full HP Officejet 8500 error; Delete not HP Officejet 8500 error: Fax log full ; Delete button from Log window also does not work seem to work. Please press the set up menu on th eprinter ...
...receive a fax error says phone off the hook and that is not the case. How do I rest the memory if that is the problem.? Thank you D. Shier [email protected] once make a setting restore factory ...
Question about HP OfficeJet Office Equipment & Supplies
error remove and check cartridge on right In the online manual for the printer we can see how to do the restore factory settings reset. Press setup > Press 6 > Press 3 This displays the tools ...
Question about HP OfficeJet Office Equipment & Supplies
ERROR: Remove and check right cartridge --- does not help Removed and cleaned old cartridge --- no help. Installed NEW cartridge --- no help. cleaned contacts in printer --- no help. Very possible bad
setting. Check settings first....is auto-answer on....rings to answer set at 1 or 2...make sure receive faxes to memory is not turned on...what you could do is restore all settings to factory defaults
...to work for most is to perform a factory reset. Here are the steps: Settings/Tools/Restore Factory Default or Setup/Tools/Restore Factory Default This is done through the menus on the printer
983 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
782 Questions
