HP Officejet 5510 All-In-One Thermal Printer "fix head stop displaying" Questions

...fix the problem all I got was advice to buy a new printer. Unless this gets resolved, not likely to purchase from HP again. I've gotten better tech support from most other vendors. i was woundering ...

...Kodak is better anyways! HP is a second rate product with first rate "BRAND RECOGNITION". THE FIX: I have a HP PSC2510, similar to all the other PCSs out there, and i was getting ...

...fix! 1. Turn off the printer . 2. Press the Stop button for 2 second and hold it. 3. Press the On button, hold it and release the Stop button. 4. Press Stop button 5 times then release together, with ...

...print head to other side and clean other part of ****. i reckon that will fix your problem its a common problem they tend to get a bit of grease on the timming ****. Thank you Sir, Have a nice

...head is blocked and need replacement, very common and I'm sorry to say costly. There is no easy fix for these heads on this machine, the only slight chance you have is to do a flush of the lines and ...

...head etc, and all seems well! did buying Canon cartridges rectify the U051 problem? do not want to pay out for more new cartridges (bought last ones from Cartridge world!) and not fix the problem. ...

...Clean Print head function a couple of times with no success. The pc company walked me through the fixing of my printer. Please cancel any charges with your company as I did not receive any help

...HEAD NOT FIRING ALL THE PINS. PRINT OUT IS TO CLEAR. RIBBON HAS BEEN CHANGED AND I HAVE COMPARED SETTINGS W/ ANOTHER PRINTER THAT IS WORKING FINE. I'm sure you have fixed this by now... But solution ...

...fix this myself if possible. Thank you Mark MacKenzie That is a Jet Heat error. Most likely a bad print head. Could be the electronics module. Either the print head heater has failed, or the supply ...

...head alignment, and then printed a test page. It came out perfect. A few hours later I found that it was displaying the same message again, and this time, nothing I do can make it go away. I replaced ...