HP Color LaserJet 2600n Printer "printing spooning help" Questions

...printing at printed page there is a ink leaking line from up to down 2 inches wide couldnt solve the problem can you help pls You could carefully clean this as follows: put the printer on some ...

...help evaporate any remaining solvent. Let sit on a clean paper towel for approx 20 minutes. (There may be a little ink bleeding out of the head, but once it dries completely it does not present any ...

...help evaporate any remaining solvent. Let sit on a clean paper towel for approx 20 minutes. (There may be a little ink bleeding out of the head, but once it dries completely it does not present any ...

I cannot unclog the printer head, even after cleaning particular head (black 3eBK) more than 10 times and deep cleaning another 10 times! Spend a whole cartrigde of black ink on this maneuver! Can ...

Canon MP800 PGBK black ink will not print, have replaced tank, have done clean and deep clean. Will not print out on nozzle check either. Tried just about everything. Clean, Deep clean, and again ...

help I had exaclty same problem - black not printing - was about to buy a new printer but did the following as a last resort about a month ago - remove the ink cartridges - removed the head and sat it

...printing black I cannot print in black. I have run all of the cleaning and maintenance cycles. One other post suggested soaking the print head. I've taken the printer apart but i'm not sure how to ...

...help evaporate any remaining solvent. Let sit on a clean paper towel for approx 20 minutes. (There may be a little ink bleeding out of the head, but once it dries completely it does not present any ...

...help evaporate any remaining solvent. Let sit on a clean paper towel for approx 20 minutes. (There may be a little ink bleeding out of the head, but once it dries completely it does not present any ...

...printing copies with lines across the page and now nothing prints. It comes out with nothing on the paper. Color prints perfectly. I tried re-starting the computer and turning the copier off then on. ...