...off printer, check and reseat fuser. no luck. any suggestions? fuser was not hot... Replace fuser assembly is the fix Normal consumable, the lamp electrics (lamp, thermistor) will have blown. Part ...
Question about HP LaserJet Office Equipment & Supplies
Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."
...come out half way it say jam in out put bin This could be a fuser issue or a paper exit sensor issue. Please take out the fuser and check the pressure roller. Be careful, the fuser is extremely
and the error code continues to show, saying fuser is hot, however I left the printer off all night. Did you repace the fuser?? When no, replace it. When yes, you probibly have a defective powersupply
Question about HP LaserJet Office Equipment & Supplies
Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."
Question about HP LaserJet Office Equipment & Supplies
Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."
fuser is too hot, but we have had the machine turned off for half an hour. Any ideas? 50.1 error is usually a fuser low temperature error. The thermistor (electronic termometer) that controls high and
Question about HP LaserJet Office Equipment & Supplies
fuser error. It means the the fusing unit is not heating up properly. This is the unit that gets hot and fixes the toner onto the paper just before the paper exits the machine. Easy to swap out if you
...saying it has a paper jam. It prints fine but apparently the back rollers of the printer do not turn on causing the paper not to come out. What can be causing the rollers in the back not to turn on?? ...
...fuser is getting hot enough. May have crud built up on it or defective. I concur with dodgecharger that the fuser is the problem. As long as your going to have it apart, invest in a separation/feed ...
1,644 questions posted
Usually answered in minutes!
1,001 Questions
724 Questions
663 Questions
593 Questions
492 Questions