HP Photosmart 2610 All-In-One InkJet Printer "grounded ethernet cable" Questions

...grounded (three-prong) wall outlet. Power Cycle: Follow the steps below to power cycle your all-in-one: 1. Verify that the unit is switched on. Disconnect the USB/Ethernet cable from the All-in-One ...

...Ethernet cable to the product, and then proceed to Step three. Step three: Plug the All-in-One directly into a wall outlet Use these steps to make sure the product is properly connected to a suitable ...

ethernet cable. The phone port are for a phone line to come into to accept faxes through a ground line. If you still have regular phone service, the line coming from the wall outlet goes into the port

...In our case apparently due to a bad ethernet cable. If the error appears after calibrating, and then you remove the cable and it doesn't, try replacing the cable. Message is Service E527 ...

Ethernet) from the rear of the printer. Any defect in a data cable may cause an electrical short circuit that could cause a loss of power to the printer. 5 Turn the printer on, this time with only the

...Ethernet cable to the product, and then proceed to Step three. Step three: Plug the All-in-One directly into a wall outlet Use these steps to make sure the product is properly connected to a suitable ...

...Ethernet, and USB cables). The only cable that should be connected to the printer at this time is the power cord. There might be a problem with either the printer, a communication cable, or the print ...

...Ethernet cable to the product, and then proceed to Step three. Step three: Plug the All-in-One directly into a wall outlet Use these steps to make sure the product is properly connected to a suitable ...

...grounded (three-prong) wall outlet. *** Step 2: Power cycle Please perform the steps below to power cycle your all-in-one, performing power cycle will remove electrical surges from the printer.Before ...

...Ethernet cable (networked computer) or USB for direct computer attachment, and phone line. UPDATE SOFTWARE: 1. Delete the Universal PCL6 printer. 2. Download the updated HP software. ...