Question about HP Office Equipment & Supplies
black vertical lines - one about 1/2 inch from the right, another about 3 inches from the right, and one about an inch from the left. It also periodically prints a thin, fuzzy, horizontal line about 1
laserjet-5 horizontal black lines 1.5 inches laserjet-5 thick horizontal black lines 1.5 inches apart. This is usually due to the developer kit. Try replacing it and see if the problem goes away. Good
Question about HP Office Equipment & Supplies
...am getting a 1/2 inch black line down the center I have a Lexmark X6575 All-in-One and am getting a 1/2 inch black line down the center of my scanned or copied page. What is causing this? reset ...
Question about HP Office Equipment & Supplies
...black lines about .75 inch wide and about .75 inch apart. When a test page is printed, all four colors have the same problem. The lines are so thick with toner that the page sticks to the fuser unit ...
...black lines in our printout. The lines run the full length of the page. One line starts about 4 inches from the left side of the paper and the other about 1 & 1/2 inch in from the right side of the ...
Question about Office Equipment & Supplies
...Black line approximately 1/2 inch wide is present for the full length of the paper when copying document (approximately 1/2 inch in from the right side of the printed paper; not there when printing ...
Question about HP Office Equipment & Supplies
...inch wide black line appears on the copies HP PSC 1500 all-in-one When it copies a 1/2 inch wide black line appears on the copy aligned with teh second roller from the left where the paper exits The ...
...The black line comes about an inch in from the right hand margin. We have recently put in a new imaging drum, wonder if this has something to do with it. Thanks Yes, you have a defective
...on the left edge of the paper. The lines go the full length of the paper and are approx. 1.5 inches wide. Is it the black photoconductor unit? Before I spend $$, I would like to be sure.
inch black line down middle of copies If your copier has an automatic feeder and your line is present when using the feeder but not when you copy from the glass,just clean the small glass at the point
958 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions