...noise with the old fuser, then it's possible that the new fuser is defective. You could try returning it for replacement at this point. If you still get the noise with the old fuser, then possibly it ...
Question about HP LaserJet Office Equipment & Supplies
...noise and fuser error 50.6 . fuser unit replaced with new one and then also the problem remains same.noise coming first and after tat fuser error 50.6 Look at fuser rollers and make sure the new one ...
Question about HP LaserJet Office Equipment & Supplies
...can stand the noise, go for it. Common problem. The fix is to change the fuser AND the fuser idler gear - RU5-0957-000CN. It is a 20 tooth gear. As the teeth wear the noise gets progressively
...fuser drive gears but usually the noise is in the fuser. Another growling noise can come from optional tray3 if installed. Easy to diagnose just lift machine off the assm. and print. Hope this ...
Question about HP LaserJet Office Equipment & Supplies
noise coming out due to faulty fuser. I want to be sure so please open the rear bin and try to print if still noise comes than i m sure it is fuser. If there are smudges on the printed page or if some
Question about HP LaserJet Office Equipment & Supplies
...noise and will eventually start causing jams in the fuser. If you notice a bunch of white dust that has an oily texture when you rub with your figures on the drive side of the fuser, that is the gear ...
...noise new fuser and fuser drive gear, loud grinding noise as motors start "Swing plate assembly" (RM1-0043-020CN) need to replace to avoid grinding noise. ..Note: Only professionals can perform this ...
Question about HP LaserJet Office Equipment & Supplies
...noise. Fuser assembly & gears have been replaced, but two weeks later, the noise came back, and now the printer has an error 50.6 Fuser Error on it... I don't even know that it is the fuser at ...
...noise fuser gears. replace the fuser. part number rm1-3740-030cn Check the fuser. Beside the fuser, also check the gears that connects to the fuser. You may put some grease to lubricate the gears. ...
...noise. There is a black line on the right of the paper. Do a half self test. To do this print anything and open the cartridge door when paper feeds into the printer but before it reaches the fuser. ...
592 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions